Application instructions

Tribotechnical composition for Engine:

Tribotechnical composition ArmActiv Engine for track

The volume of bottle is 190 ml (6.4 oz), 385 ml (13 oz).

Tribotechnical composition is designed to treat any type of engine (gasoline, diesel, gas) to protect against wear, reduce friction and optimize work processes.

Dosage
Engine volume, L Dosage 3 - 9 9 -16
ml per volume 190 ml / 6.4 oz 385 ml / 13 oz
Overdose of composition up to 50% doesn’t make any harm to the engine.

If the mileage exceeds 100,000 miles, it is recommended to repeat the treatment at the next oil change.

Sequencing:

  1. Bring the engine to operating temperature (normal operation);
  2. Stop the engine;
  3. Shake a bottle of ArmActiv Engine;
  4. Breaking the tamper control, open the cover and pour the composition into the oil filler neck of the engine;
  5. Close oil filler cap with stopper;
  6. Check the oil level (see the operation manual), if it is insufficient, top up the oil level (see the operation manual);
  7. Start the engine and continue driving in normal mode, providing a run of at least 10-15 mile.

Pour the composition into fresh oil (after replacement).

Compatible with any type of oil.

Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

Shelf life - 5 years.

Attention!

Do not apply for mechanical damage to components and mechanisms.

 

Tribotechnical composition ArmActiv Engine for tractor

The volume of bottle is 190 ml (6.4 oz), 385 ml (13 oz).

Tribotechnical composition is designed to treat any type of engine (gasoline, diesel, gas) to protect against wear, reduce friction and optimize work processes.

Dosage
Engine volume, L Dosage Up to 5 5 - 7 More than 7
Ml / oz per volume 190 / 6.4 385 / 13 385 / 13
Overdose of composition up to 50% doesn’t make any harm to the engine.

Sequencing:

  1. Bring the engine to operating temperature (normal operation);
  2. Stop the engine;
  3. Shake a bottle of ArmActiv Engine;
  4. Breaking the tamper control, open the cover and pour the composition into the oil filler neck of the engine;
  5. Close oil filler cap with stopper;
  6. Check the oil level (see the operation manual), if it is insufficient, top up the oil level (see the operation manual);
  7. Start the engine and continue working in normal mode, ensuring the work of not less than 5 hours.

Pour the composition into fresh oil (after replacement).

The processing is designed for a minimum of 4,000 hours of work.

Compatible with any type of oil.

Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

Shelf life - 5 years.

Attention!

Do not apply for mechanical damage to components and mechanisms.

Tribotechnical composition for transmission and gear box:

ArmActiv Trax, ArmActiv Gear 

The products are completely interchangeable.

The volume of bottle 190ml (6.4 oz).

Tribotechnical composition is designed to treat driving axles and mechanical gearboxes to protect against wear, reduce friction and optimize work processes.

Dosage
Oil volume, L Dosage More than 7
ml / oz per volume 190 / 6.4
Overdose of composition up to 50% doesn’t make any harm to the transmission.

Sequencing:

  1. Bring the mechanic gear to operating temperature (normal operation);
  2. Stop the engine;
  3. Shake a bottle of ArmActiv;
  4. Breaking the tamper control, open the cover and pour the composition into the oil filler hole of the transmission. If access to the oil filler hole is difficult, use an oil syringe;
  5. Close the oil filler hole with a stopper;
  6. Start the engine and continue working in the normal mode, ensuring the work of not less than 10 mile or 5 hours (for tractor).

The processing is designed for a minimum 100.000 ml or 4,000 hours of work (for tractor).

Compatible with all types of transmission oils.

Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

Shelf life - 5 years.

Attention!

Do not apply for mechanical damage to components and mechanisms.

Tribotechnical composition for hydraulic systems:

ArmActiv Hydro

The volume of bottle is 190 ml (6.4 oz) , 385 ml (13 oz).

Tribotechnical composition is designed to treat hydraulic systems (hydraulic motors, hydraulic cylinders, pumps) to protect against wear, reduce friction and optimize work processes. Ideal for treating machinery that operates under conditions of severe dustiness.

Dosage
5 ml of composition per 1 L of hydraulic liquid.
Overdose of composition up to 70% doesn’t make any harm.

Sequencing:

  1. Stop the engine;
  2. Switch off the hydraulic system;
  3. Shake the bottle with ArmActiv Hydro;
  4. Open the cover by breaking the opening control and pour the composition into the hydraulic fluid through the standard filler neck;
  5. Start the engine, turn on the hydraulic system and continue working in standby mode for at least 25 minutes.

Periodicity of processing:

The treatment should be performed at each scheduled replacement of the hydraulic fluid, but not more often than after 4000 hours.

The produced treatment is designed for the production of not less than 4000 hours.

Compatible with all types of hydraulic fluids.

Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

Shelf life - 5 years.

Attention!

Do not apply for mechanical damage to components and mechanisms.

Tribotechnical composition for machine tools, industrial equipment:

ArmActiv Industry

The volume of bottle is 190 ml / 6.4 oz.

For use in machine tools, industrial equipment.

Tribotechical composition is designed for treating parts of machine tools and industrial equipment to protect against wear and reduce friction.

Blends with any type of oil and coolant.

For machine tool fleet

Treatment in the usual production cycle of drives, gears, sliding guides of any machine tools by introducing tribotecnical component ArmActiv Industry into the lubricating oil of the equipment.

Treatment in the usual production cycle of bearing slides by introducing the tribotechical composition ArmActiv Industry into the grease oil.

Processing of the cutting tool by adding tribotechnical composition ArmActiv Industry in the coolant-cutting fluid in the production process.

The effect of complex treatment of the machine:

  • Reduce the friction losses;
  • Reduce the electricity consumption to 20%;
  • Optimize bearing and sliding guides gaps;
  • Reduce vibration;
  • Improve surface quality of the part.

Treatment of cutting tools through coolant-cutting fluid leads to an increase in the life of the cutting tool and the quality of the surface of the part.

The use of tribotechnical composition ArmActiv Industry allows avoiding equipment breakdown in case of emergency oil loss.

ArmActiv for gas pumping stations, pumping stations

Tribotechnical composition is designed for treating gas pumping stations units and pumping equipment for special purposes to protect against wear, reduce friction and extend the timing of inter-service.

For diesel and gas piston generators

Application: in normal operation mode, the treatment of cylinder-piston group parts, crank mechanism and other friction parts of the diesel engine by introducing tribotechnical composition ArmActiv Industry into the lubricating oil.

Effect:

  • Increase the resource of the parts of the cylinder-piston group and the crank mechanism up to 2 times;
  • Reduce the fuel consumption up to 10%;
  • Reduce the oil consumption by burning up to 3 times;
  • Reduce the emission of harmful exhausts by CO, CH and NOx up to 20%;
  • Reduce noise and vibration by 5-10 dB;
  • Increase the life of the lubricating oil up to 2 times.

For piston, screw and turbochargers

Application:

In the mode of normal operation of friction parts of the compressor by introducing the tribotechnical composition ArmActiv Industry into the lubricating oil.

Effect:

  • Increase the life of parts of the cylinder-piston group and the crank mechanism up to 2 times;
  • Restore the compressor parameters to nominal pressure and capacity;
  • Reduce the electricity consumption up to 15%;
  • Reduce the oil consumption in compressible medium up to 3 times;
  • Reduce noise and vibration up to 5 dB;
  • Ability to work for some time with an emergency loss of lubrication;
  • Reduces the working oil temperature.