ArmActiv Engine for all type of gasoline and diesel engine
ArmActiv Engine for all type of gasoline and diesel engine
ArmActiv Engine for all type of gasoline and diesel engine

ArmActiv Engine for all type of gasoline and diesel engine

Regular price
Sale price
Shipping calculated at checkout.

One treatment for 100,000 miles or 4,000 machine hours (for tractors)

Tribotechnical composition is designed to treat any type of engine (gasoline, diesel, gas) to protect against wear, reduce friction and optimize work processes.

Engine volume, L Dosage 3 - 9 9 - 16
ml per volume 190 ml / 6.4 oz 385 ml / 13 oz
Overdose of composition up to 50% doesn’t make any harm to the engine.

If the mileage exceeds 100,000 miles or 4,000 machine hours (for tractors), it is recommended to repeat the treatment at the next oil change.

Volume – 190 ml (6.4 oz) and 385 ml (13 oz).

Blends with any type of oil.

ArmActiv is manufactured using the latest patented TCN technology (Technology of Carbon Nanoreinforcement)


  • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads).
  • Antifriction (reduces friction loss).
  • Anti-wear (significantly reduces the wear of friction pairs).


  • Increase the engine life up to 3 times due to formation of a tribopolymer layer on the surface of friction;
  • Reduce the fuel consumption up to 10%;
  • Complete absence of wear at the time of "cold start";
  • Significantly reduce vibration and hence noise;
  • Reduce the toxicity of exhaust gases due to more complete combustion of fuel;
  • Optimization of gaps.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of motor oils.


Before use, shake the bottle with the composition intensively.

Pour the composition into fresh oil (after replacement).

The temperature of the composition should be approx. + 200С.

  1. Pour the composition into the engine heated to operating temperature;
  2. Fill the composition in the oil filler neck of the engine;
  3. After pouring the composition into the engine, start moving in the normal mode, providing a run of 10 - 15 mile / 5 engine hour;
  4. The dosage of the composition and recommendations are given in the instructions;
  5. Strictly follow the instructions for use.


  1. The engine must be in good condition;
  2. It is not allowed to pour the composition into the cold engine.


The lid provides tightness and control of the first opening.

Storage conditions: -200С - +700С.

Shelf life: 5 years from the date of production (indicated on the vial).